LEAPS - Low Energy Accurate Positioning System
==============================================

Getting Started
***************

1 - Install Docker use "docker_install.sh" then reboot OS (https://docs.docker.com/get-docker/).

2 - Use update_configuration_ip.sh script to update the configuration to the 
    running PC's IP address.

3 - Use leaps_docker_run_all.sh script to pull and run from docker hub for 
    leaps_center, leaps_server, leaps_gateway and mosquitto.

4 - Connect the gateway board to the PC with a USB cable using USB port #2.

5 - Open leaps_center then configure the network with the network ID on the 
    connecting gateway board. 

6 - Optional: Use "mosquitto_sub -p 1883 -d -v -t \#" to check message.

# Please see our online documentation here https://docs.leapslabs.com/udk-start/
