网关

注解

请注意，以下命令仅适用于 Gateway MCU.

ana

ana: 设置节点的 UWB, BLE, 以太网或 Wi-Fi 地址. (参见 dwm_mac_addr_set)

示例:

dwm> ana
dwm> ana
Usage: ana <TYPE> <ADDR>
 TYPE can be 0=UWB, 1=BLE-Random, 2=BLE-Public, 3=ETH, 4=WiFi
 ADDR is 6-byte long hex number
dwm> ana 0 0xaabbccddeeff
ana: ok

amls

amls: 设置一次 MAC 地址列表

示例:

dwm> amls 0xaabbccddeeff 0x112233445566
amls(ok)

amlg

获取 MAC 地址列表，并参考 dwm_mac_addr_get 进行描述.

usr - 用户指定的自定义 MAC 地址
pub, rand - 公共或随机 BLE 地址
def - 默认地址
def, mutable - 可修改的默认地址. 如果默认地址是可变的，则只能更改一次.

示例:

dwm> amlg
mac0=68:79:12:90:11:11 (usr)
mac1=68:79:12:90:22:22 (def, pub)
mac2=68:79:12:90:33:33 (def)
mac3=

ahs

ahs:设置 OTP 存储器中的硬件版本.

示例:

dwm> ahs
Usage: ahs <hw_ver>
dwm> ahs 0x01100152
ahs: ok

acs

仅在以太网网关上可用，它配置节点.

示例:

leaps> acs
usage: acs [leds 0|1] [enc 0|1] [fwup 0|1] [uwb 0|1|2]
uwb 0-off,1-pasv,2-act
leaps> acs leds 0 fwup 0
ok

ums

仅在以太网网关上可用，设置默认 UART 模式（二进制或 shell）.

示例:

dwm> ums 1
...
dwm> ums 0

nif

仅适用于以太网网关及其打印接口.

示例:

leaps> nif

Interface 0x20435600 (Ethernet) [1]
===================================
Link addr : 02:04:25:54:00:01
MTU         : 1500
Ethernet capabilities supported:
            Virtual LAN
            10 Mbits
            100 Mbits
            Priority queues
IPv4
  unicast addresses (max 1):
            192.168.1.112 DHCP preferred
  multicast addresses (max 1):
            <none>
  gateway : 192.168.1.1
  netmask : 255.255.255.0
DHCPv4 lease time : 7200
DHCPv4 renew time : 3600
DHCPv4 server       : 192.168.1.1
DHCPv4 requested  : 192.168.1.112
DHCPv4 state        : bound
DHCPv4 attempts   : 1

ipv4

仅在以太网网关上可用，可设置本地 IPv4 网络配置. 连接互联网时，默认 DNS 服务器为 8.8.8.8 和 4.4.4.4. 默认的 NTP 时间服务器是 time.google.com.

示例:

leaps> ipv4
usage: ipv4 [static|dynamic] [eth|wifi] [addr STRING] [mask STRING] [gw STRING]

Use DHCP server to obtain IP address
leaps> ipv4 dynamic
ipv4 (Success)

Use static IP address settings
usage: ipv4 addr 192.168.1.103 mask 255.255.255.0
ipv4 (Success)

dns

仅适用于以太网网关，可配置 DNS 服务器. 它只有在使用静态 IP 地址或 DHCP 服务器不提供 DNS 设置时才会生效.

示例:

leaps> dns
usage: dns [STRING STRING]

Configure DNS server (up to 2 DNS servers is supported)
leaps> dns 8.8.8.8
dns (Success)

wifi

仅适用于以太网网关，可配置 WIFI SSID, PSK 和扫描区域. 请勿在 SSID 和 PSK 中使用空白字符.

示例:

leaps> wifi
usage: wifi [ssid] [pwd] [region]
region 0-europe(default), 1-north-america, 2-asia

Configure SSID, PSK
leaps> wifi MyWifiSSID mywifipassword
wifi (Success)