leaps_autopos_start
Starts auto-positioning measurement/procedure. The auto-positioning can be started only on the real initiator, otherwise it if refused and error code is returned. Successful auto-positioning procedure ends with set of distances generated as an event. The event “location ready” has to be enabled prior to the start by leaps_int_cfg_set or leaps_ble_evt_cfg_set.
Input
(none)
Output
Example
TLV request |
|
|---|---|
Type |
Length |
0x09 |
0x00 |
Type 0x09 means command leaps_autopos_start
TLV response |
||
|---|---|---|
Type |
Length |
Value |
0x40 |
0x01 |
0x00 |
Type 0x40 means status code