leaps_enc_key_clear
Clears the encryption key and disables encryption option if enabled. Does nothing if the key is not set.
This call writes to internal flash in case of new value being set, hence should not be used frequently and can take in worst case hundreds of milliseconds! Requires reset for new configuration to take effect.
Input
(none)
Output
Example
TLV Request |
|
|---|---|
Type |
Length |
0X3D |
0x00 |
Type 0x3D means command leaps_enc_key_clear
TLV response |
||
|---|---|---|
Type |
Length |
Value |
0x40 |
0x01 |
0x00 |
Type 0x40 means status code