leaps_factory_reset
Puts node to factory settings. Environment is erased and set to default state. Resets the node. This call does a write to internal flash, hence should not be used frequently and can take in worst case hundreds of milliseconds!
Input
(none)
Output
Example
TLV Request |
|
|---|---|
Type |
Length |
0x13 |
0x00 |
Type 0x13 means command leaps_factory_reset
TLV response |
||
|---|---|---|
Type |
Length |
Value |
0x40 |
0x01 |
0x00 |
Type 0x40 means err_code of the previous command