leaps_stnry_cfg_get
Reads configuration of the stationary mode which is used by the tag node. The configuration can be read even if stationary detection is disabled (see leaps_cfg_tag_set).
Input
(none)
Output
sensitivity: ‘0’ | ‘1’ | ‘2’ (0 - LOW [512 mg] , 1 - NORMAL [2048 mg], 2 - HIGH [4064 mg])
Example
TLV Request |
|
|---|---|
Type |
Length |
0x12 |
0x00 |
Type 0x12 means command leaps_stnry_cfg_get
TLV response |
|||||
|---|---|---|---|---|---|
Type |
Length |
Value |
Type |
Length |
Value |
0x40 |
0x01 |
0x00 |
0x4A |
0x01 |
0x01 |
Type 0x40 means status code
Type 0x4A means stationary sensitivity