leaps_uwb_scan_start not implemented
Starts scan of the UWB network. The end of the scan is communicated to the user by event that can set dedicated GPIO pin (CORE_INT) if enabled by leaps_int_set. The result of the scan can be read by leaps_uwb_scan_result_get. The status flag is set when the event is generated. The status can be read by leaps_status_get.
Input
(none)
Output
Example
TLV request |
|
---|---|
Type |
Length |
0x23 |
0x00 |
Type 0x23 means command leaps_uwb_scan_start
TLV response |
||
---|---|---|
Type |
Length |
Value |
0x40 |
0x01 |
0x00 |