leaps_peer_cfg_set

Sets the MQTT broker / peer server connection parameters including TLS options, port, and hostname. The configuration is stored in non-volatile memory. A network restart is triggered automatically after this command.

---

Example

TLV Request
Type	Length	Value
		Byte 0: flags - Bit 0=use_tls, Bit 1=mutual_auth, Bit 2=use_mac_filter, - Bit 3=auth_check_CN, Bits[7:4]=reserved - use_tls: Enable TLS for the connection. - mutual_auth: Enable mutual TLS authentication (client cert required). - use_mac_filter: Enable MAC address filter. - auth_check_CN: Verify server Common Name (CN) in TLS certificate. Byte 1–2 (reserved): 0x00 0x00 Byte 3–4 (port): little-endian uint16 Byte 5 (host_len): number of host bytes that follow (no null) Byte 6..6+host_len-1 (host): ASCII string, no null terminator
0x9A	0x16	01 00 00 B3 22 10 6D 71 74 74 2E 65 78 61 6D 70 6C 65 2E 63 6F 6D

In this example:

• LS enabled,

• port 8883,

• host "mqtt.example.com" (16 chars)

Type 0x9A (154) means command leaps_peer_cfg_set

TLV response
Type	Length	Value
0x40	0x01	0x00

Type 0x40 means status code