システム要件
The following sections provide details on necessary software and hardware before starting with SDK on UDK1 devices.
Hardware & Software
Please install below software tool before jump into development phase:
アイテム |
アイテム バージョン |
説明 |
|---|---|---|
0.14.2 |
Mandatory. The RTOS includes a BSP package, supported for the UDK1 device. |
|
-- |
Aim to provide firmware upgrades, debugging, programming in the system. For detailed installation, refer to the section ファームウェアのプログラミング/アップグレード. |
|
-- |
Aim to provide firmware upgrades, debugging, and programming in the system. For detail installation, refer to the section ファームウェアのプログラミング/アップグレード. |
|
Desktop Device |
-- |
Mandatory, recommend: supports Linux environment to fit with guidelines. |
Environment Setup
Each device is equipped with an onboard USB DAPLink, facilitating seamless programming and debugging of the target microcontroller.
The USB DAPLink must be connected to a PC to program the firmware into the boards.
The figure below depicts the isolated connection required for programming the firmware.