系统要求
硬件
The subsequent table comprises a list of essential hardware required to set up the upcoming sections demos. Please be advised that certain items are optional and not mandatory for all the demonstrations.
项目 |
数量 |
必要性 |
描述 |
|---|---|---|---|
UDK1 Kit |
1+ |
必填 |
Each kit comprises of one LC13 device (with AoA antenna), five LC14 devices (with non-AoA antenna), and 2 USB type C data cables. |
USB-C
数据
电缆
|
2+ (depending on the demo) |
可选 |
To power the UDK1 devices, for data exchange with a PC, or to re-flash the firmware. Note: 2 USB-C data cables are available in the UDK1 box. Re-flashing the board is optional. Devices are programmed from the production. |
电池 |
6+ (depending on the demo) |
可选 |
To power the UDK1 device without using the USB-C cable.
推荐:
|
Clamp or
tripod with
camera
4+
|
4+ |
推荐 |
For attachment of the Anchor devices in the RTLS demos.
Recommended: Super Clamp Mount
|
1 |
推荐 |
Used for running the LEAPS 管理器, an application that can be used to configure the devices and visualize of the network using Bluetooth or MQTT. Requires Android OS version 6.0 or higher. |
|
iOS
设备
|
1 |
可选 |
Used for running the Qorvo 附近的互动 application, an iOS application that communicates with the Nearby Interaction accessories (UDK1) and displays the distances and directions to them. Requires an iPhone with an U1 chip and iOS version 16 or newer. |
桌面
设备
|
1 |
可选 |
User for various purposes: for running a VirtualBox image that contains the web server applications (LEAPS 网关, LEAPS 服务器, LEAPS 中心 and MQTT Broker), supporting Windows, MacOS and Linux operating systems. Besides that, it can be used for for updating the device using USB/UART/Bluetooth, for communication with the device via USB/UART, for reprogramming of the UDK1 devices that contain the DAPLink integrated and for development of custom applications using the UDK1 SDK. |
树莓
Pi 3B
或更新
|
1 |
可选 |
Used for fast setup of a gateway with web server applications, including LEAPS Gateway, LEAPS Server, LEAPS Center and MQTT Broker. Besides that, it can be used for updating the device using USB/UART/Bluetooth, for communication with the device via USB/UART, for reprogramming the UDK1 devices that contain the DAPLink integrated. |
软件
Below is the list of all software applications and tools that are essential for demonstration purposes and for development with the UDK1.
LEAPS Applications and Tools
项目 |
版本 |
必要性 |
描述 |
|---|---|---|---|
- |
可选 |
The LEAPS Ultra-Wideband Sus-System firmware. The UDK1 devices come with LEAPS UWBS preloaded from the production. The firmware is necessary only in case of firmware update or device recovery. |
|
- |
可选 |
一个 Android 应用程序，可使用蓝牙或MQTT进行设备配置和网络可视化. |
|
- |
可选 |
A Linux daemon application that serves as a bridge between the LEAPS UWBS and the LEAPS Server and, hence the TCP/IP network. |
|
- |
可选 |
一个Linux daemon应用程序，作为UWB网络的中央数据中心，负责汇集数据，并通过MQTT Broker从外部系统传输数据. |
|
- |
可选 |
用于配置和可视化 UWB 网络的网络应用程序. |
|
- |
可选 |
UDK1 SDK (Software Development Kit) based on Zephyr RTOS that can be used for evaluation and development of the custom Ultra-Wideband applications. |
Partner Applications and Tools
项目 |
版本 |
必要性 |
描述 |
|---|---|---|---|
- |
可选 |
A Qorvo® desktop application that demonstrates the functionality of Qorvo FiRa-compatible devices. It allows configuring the devices and visualizing the Two-Way Ranging, Angle-of-Arrival and location data on a desktop. The application supports Windows, macOS and Linux operating systems. |
|
- |
可选 |
Qorvo® Nearby Interaction and Qorvo® NI Background applications that allow users to easily evaluate Qorvo Ultra-Wideband technology with the Apple Nearby Interaction framework. The application is available on the App Store. |