leaps_wifi_cfg_get
This call is available only on the ethernet gateway. It gets the current WiFi configuration. Refer to leaps_wifi_cfg_set for the payload layout and field descriptions.
(none)
region: ‘0’ | ‘1’ | ‘2’ (WiFi regulatory region code)
‘0’: Europe
‘1’: North America
‘2’: Asia
ssid: ASCII string (SSID, max 31 characters on wire, no null terminator)
psk: ASCII string (WPA2 passphrase, 8–31 characters on wire, no null terminator)
Example
TLV Request |
|
|---|---|
Type |
Length |
0x9D |
0x00 |
Type 0x9D (157 dec) means command leaps_wifi_cfg_get
TLV response |
|||||
|---|---|---|---|---|---|
Type |
Length |
Value |
Type |
Length |
Value |
byte 0: region
bytes 1–3: reserved
byte 4: ssid_len
bytes 5..(5+ssid_len-1): ssid
byte 5+ssid_len: psk_len
(5+ssid_len+1)..end: psk
|
|||||
0x40 |
0x01 |
0x00 |
0x7D |
0x1C |
0x00 0x00 0x00 0x00 0x09 0x4D 0x79 0x4E 0x65 0x74 0x77 0x6F 0x72 0x6B 0x0D 0x4D 0x79 0x50 0x61 0x73 0x73 0x77 0x6F 0x72 0x64 0x31 0x32 0x33 |
Type 0x40 means status code
Type 0x7D (125 dec) means WiFi configuration (same layout as leaps_wifi_cfg_set input)